A Study on Effect of Operating Conditions on Gerotor Pump Performance

One of the important accessories of the lubrication system of an aero-engine is the oil pump which consists of multiple pumps with tandem gerotor elements housed in a single casing. This paper presents the volumetric efficiency variation of a single-stage gerotor pump specially designed for aero-engine by conducting experiments at on and off-design conditions and comparing it with the CFD analysis. A Gerotor pump having fixed geometrical parameters designed based on a  athematical 1D model using MatLab and AMESim is manufactured and tested. Performance evaluation of these pumps for pressure and temperature has been discussed in this paper. Commercial CFD code ANSYS-Fluent with a standard k- ε turbulence model has been used for performance evaluation of gerotor pump. Flow characteristics studies on the prototype pump indicate that simulation results closely matched the experimental data. The study concludes that the simulation method adopted is appropriate for predicting the performance of the gerotor pump and the contribution of outlet pressure to the pump volumetric efficiency is significant

Asserting The Security Restrictions Applicable To Images Posted By Users To Information Platforms

It's becoming more difficult to maintain privacy in the age of social media, as seen by the recent rash of high-profile examples in which people have inadvertently released private information online. All of these incidents show why it's crucial to have user access management tools for freely available information. To address this requirement, we propose an Adaptive Privacy Policy Prediction (A3P) system that may provide users with guidance on how to organise their picture privacy settings. Here, we investigate if and how a user's privacy preferences may be revealed via their social network settings, image content, and metadata. Our two-tiered method takes into account the user's prior activity on the site to determine the most fitting privacy options for their future picture uploads. Our method employs a policy prediction algorithm to automatically build a policy for each newly submitted image, taking into consideration users' social qualities, and an image classification framework to find groups of photos that may be associated by similar rules. Rulemaking will evolve over time to accommodate shifting public attitudes towards personal data privacy. We provide the results of a large-scale analysis of more than 6,000 policies, demonstrating that our method achieves prediction accuracy of 93% or better

On the possible use of satellite fixed positions for Argo profiles in case of GPS failures

INCOIS had deployed iridium based PROVOR Bio-Argo floats obtained from NKE, France. These floats are fitted with GPS for obtaining accurate position of the Argo profiles. However there are cases where in the GPS fitted with the Argo floats tend to give wrong positions owing to unknown reasons. In this present work we discuss the possibilities of using the Iridium satellite fixed position in case of GPS failures. For this, analysis was done by comparing the GPS and satellite fixed profiles positions of good floats. These statistics can be used for using the satellite fixed position in case of GPS failures. For each comparison the satellite fixed position with least circular error probability (CEP) radius was chosen. The study suggested that on a average the satellite fixed positions tend to differ from the GPS fixed positions by 0.03 degrees. CEP radii are found to be consistent with the difference between satellite fixed position and GPS position. Based on this we suggest a quality flag of 2 for positions with CEP radius <=4 and flag 4 for any other positions

Moisture management finish on woven fabrics

Moisture management behaviour of four different woven fabrics, such as cotton, polyester/cotton blend, microdenierpolyester and nylon, has been studied. A wetting agent of ethoxylated alcohol blend and moisture management finishingagents, such as amino silicone polyether copolymer and hydrophilic polymer, have been prepared and used. Moisturemanagement finishes with wetting agent and without wetting agent are imparted onto woven fabrics. The effect of moisturemanagement finishing process parameters on the comfort properties of woven fabrics has been studied. The optimization ofcomfort level by varying the moisture management finishing process parameters in order to achieve suitability for makingsports wear is done. It is found that the type of fibre and linear density of yarn affect the comfort properties of woven fabricswhich include wicking, wetting, water absorbency and moisture vapour transmission characteristics. Based on the testresults, microdenier polyester fabrics and cotton fabrics exhibit good wicking, wetting and water absorbency characteristicsthan the polyester/cotton blend and nylon. It is found that the combination of ethoxylated alcohol (wetting agent) and therecipe containing amino silicone polyether copolymer and hydrophilic polymer in the ratio of 1:2 with pH of 5.5 at 600-700 Ctemperature is the optimum finishing process than the other two combinations so as to attain better comfort propertiesfor sportswear

Moisture management finish on woven fabrics

486-491Moisture management behaviour of four different woven fabrics, such as cotton, polyester/cotton blend, microdenier polyester and nylon, has been studied. A wetting agent of ethoxylated alcohol blend and moisture management finishing agents, such as amino silicone polyether copolymer and hydrophilic polymer, have been prepared and used. Moisture management finishes with wetting agent and without wetting agent are imparted onto woven fabrics. The effect of moisture management finishing process parameters on the comfort properties of woven fabrics has been studied. The optimization of comfort level by varying the moisture management finishing process parameters in order to achieve suitability for making sports wear is done. It is found that the type of fibre and linear density of yarn affect the comfort properties of woven fabrics which include wicking, wetting, water absorbency and moisture vapour transmission characteristics. Based on the test results, microdenier polyester fabrics and cotton fabrics exhibit good wicking, wetting and water absorbency characteristics than the polyester/cotton blend and nylon. It is found that the combination of ethoxylated alcohol (wetting agent) and the recipe containing amino silicone polyether copolymer and hydrophilic polymer in the ratio of 1:2 with pH of 5.5 at 600-700 C temperature is the optimum finishing process than the other two combinations so as to attain better comfort properties for sportswear

COVID-19 Vaccine Effectiveness in Preventing Severe Infections and Mortality among Patients in Kerala, India.

ABSTRACT Background: India has a top status among world countries, related to the COVID-19 mortality that had crossed the 3-lakh level. The second wave of COVID19 had ravaged the world countries, created havoc of the highest order, leaving many hapless, thanks to the low availability of oxygen, ICU facilities, vaccines and counselling prospects. There is a lack of information about how COVID-19 vaccines have affected mortality in specific geographic areas. Method: A Retrospective record-based design. Patients were matched for age, sex, ethnicity, co-morbidities and grouped into fully immunized, partially immunized and non-immunized. The primary outcome was in-hospital deaths and secondary outcome was severe covid infections. (Severe covid infections are defined as Category C in WHO and ICMR classification) Results: Vaccines administered in standard dosage confer considerable benefit by reducing severe illness, hospitalization and death. This is clearly visible by the lower proportions of those with hypoxia, high levels of markers, those requiring ICU support and death in vaccinated individuals. The type of vaccine administered did not have any influence on the severity and outcome of illness. Conclusion: The second wave that peaked in May 2021 would have been less disastrous had more people been vaccinated. Without a reimagined vaccination strategy, reaching the desired full vaccination status was a difficult endeavor. The signs are unmistakable that a combined approach involving swift vaccination and scientific measures to curb transmission holds great promise. A zero covid world looks less imminent. But humans can make the microbe less lethal

Tissue culture-independent in planta transformation strategy: an Agrobacterium tumefaciens-mediated gene transfer method to overcome recalcitrance in cotton (Gossypium hirsutum L.)

The major constraint in cotton improvement has been the recalcitrance of cotton varieties to tissue culture. Alternate methods that avoid/ minimize tissue culture would be beneficial for the improvement of cotton. In this report, transgenic cotton plants have been produced by a tissue-culture independent Agrobacterium tumefaciens - mediated transformation procedure. Agrobacterium strain LBA4404 harboring the binary vector pKIWI105 that carries the genes for &#946;-glucuronidase (GUS) and neomycin phosphotransferase (npt II) was used for transformation. Apical meristem of the differentiated embryo of the germinating seedling is infected with Agrobacterium. Since the transgene is integrated into the cells of already differentiated tissues, the T0 plants will be chimeric and stable integration can be seen only in the T1 generation. The first proof of transformability in the T0 generation was indicated by the GUS histochemical analysis of the seedlings, five days after co-cultivation and subsequently in the pollen and lint. T1 transformants were identified by PCR analysis and subsequently confirmed by Southern. Three plants (T1) with single copy insertions were selected for continuing into the next generations. Molecular characterization and GUS expression analysis (histochemical and fluorimetric) of the T1, T2 and T3 generation suggested the feasibility of the method to generate transgenic plants in cotton

Ultrastructural study on morphology of Schistosoma spindale by Scanning electron microscopy (SEM)

The present study was undertaken to investigate the detailed morphological features along with morphometry of different structures of Schistosoma spindale (Adult flukes) which were recovered by a perfusion technique and visualized by Scanning Electron Microscopy (SEM). The length of spines on the oral sucker and ventral suckers were 2.6 µm and 2.5 µm, respectively. The measured width of aspinose area beneath the ventral sucker, rim of the ventral sucker and tegumental papillae were 5.4, 22.5 µm and 3 µm, respectively. Males have a welldefined gynaecophoric canal, originating just below the ventral sucker and extending up to the posterior end of the body, continued as a marked conical projection. The ventral surface of the oral sucker was completely covered with numerous spines. The ventral sucker was pedunculated, round, thick-rimmed and the inner side contained numerously pointed spines directed towards the center of the ventral sucker. The tegument surface of S. spindale showed ridged layers with large uniciliated and pit like papillae which were recorded more in posterior end. Thus, Scanning Electron microscopy (SEM) provided indepth ultrastructural morphological details of Schistosoma spindale which was in accordance with that of previous studies, would be applicable for its differentiation with other species (S. mansoni, S. bovis, S. haematobium, S. japonicum)

Physiological approaches to improving harvest index and productivity in sunflower

Factors associated with variation in harvest index and approaches to improve harvest index (HI) and productivity in sunflower are discussed in this article. In recent years, higher productivity in sunflower has been achieved mainly through increased crop growth rates. Besides, an improvement in harvest index also has contributed for improved productivity to a certain extent. In our study we observed that medium duration types (100 to 110 days) had high HI compared with early or long-duration varieties and we also attempted to understand the ways and means to improve HI in sunflower types with varied duration. Genotypes which had low partitioning of dry matter to stem plus thalamus had high HI. Genotypes which accumulated high biomass during post flowering stages of development also showed high HI and seed yield. In a few genotypes remobilization of photosynthates from vegetative plant parts to the seed resulted in high HI and seed yield. Among the sink characters, the number of seed per head, test weight and seed density (weight/volume) also contributed to achieving high HI values. Identification and selection of genotypes based on these criteria will increase the production further. Since large amount of biomass is still locked up in the vegetative plant parts, any practice to manipulate the mobilization of photosynthates from vegetative parts to head also improves HI and thus seed yield. In our experiment, we observed that foliar application of boron nutrient and application of growth regulators to the head improved the translocation of photosynthates to the head and thus increased the HI and seed yield